We make a support for clematis: making an arch and a wooden trellis

We make a support for clematis: making an arch and a wooden trellis

Beautiful plants, strewn with a scattering of star-shaped flowers, adorn most of the suburban areas. Graceful stems of clematis, climbing on a trellis or support, form openwork screens, crowned with many elegant flowers of the most incredible shapes and shades. These beautiful plants are used mainly for vertical gardening, and they are able to show the greatest decorativeness only if they are placed on a support. And therefore, a support for clematis with your own hands is a constituent element of the competent organization of vertical gardening in landscape design.

Features of growing clematis

Thin vines, strewn with many beautiful flowers, are welcome guests in many areas. Blooming in early summer, they are able to delight with amazing flowering throughout the season.

Large-flowered varieties, capable of covering an area of ​​up to 4-5 meters, act as an elegant decoration of the ceremonial areas of the site: the walls of the veranda and gazebo, the central entrance and the front garden

Small-flowered varieties of clematis are perfect for shading the facades of buildings, grottoes, stairs and unsightly buildings.

A hedge made of clematis, like a woven dense carpet of thousands of wonderful flowers, can not only transform the site, but hide it from the prying eyes of passers-by

Clematis are plants that prefer sunny areas, but require shading of the root system, in simple words, the head is in the sun, and the legs are in the shade. The second no less important condition for the cultivation of these flowering plants is their placement on supports. Correctly selected supports for clematis will allow you to give the desired shape to the compositions and show the decorative qualities of the plant.

Clematis most often act as the center of design for vertical gardening. When choosing plants for decorating a plot, it is advisable to take into account the biological characteristics of a particular variety. Wanting to create falling cascades or elegant garlands, it is better to opt for varieties whose flowers are more concentrated at the ends of the shoots, for example: Serenade of Crimea, Biryuzinka, Alpinist. For the design of carpet compositions, it is better to give preference to varieties, the flowers of which are evenly distributed along the liana: Cosmic Melody, Alyonushka, Gray bird.

You can learn about other types of unpretentious vines for the garden from the material: https://diz-cafe.com/ozelenenie/liany-dlya-sada.html

Types of supports for flowering clematis

Depending on the shape of the support for clematis, there are:

  • Arched;
  • Pyramidal;
  • Fan designs.

The main requirements for them are: decorative, ease of installation and ease of use. Thanks to the support, the stems of clematis do not break or trample. With the help of vertical stands, it is possible to provide ventilation of the plants, which is the key to their rapid development and abundant flowering. The arch is the most common type of garden support for flowering plants.

A support entwined with flowering clematis, in addition to being an elegant element for decorating any garden, helps to divide the space into separate functional zones

The arch, entwined with clematis, installed at the beginning of the path, looks just amazing. She invites you to walk along the winding paths of the garden and immerse yourself in its enchanting beauty.

Clematis also feel comfortable on pyramidal tripods made of reed, or metal or willow rods.

The material on the types of supports for climbing plants will also be useful: https://diz-cafe.com/ozelenenie/opory-dlya-vyushhixsya-rastenij.html

The pyramidal supports provide good support for the flexible stems of the plant. They look appropriate both in multi-tiered flower arrangements, and as a free-standing structure.

You can create a cozy romantic corner in the garden, where you can retire on a sultry afternoon or on a cool evening, hiding from the prying eyes of passers-by and enjoying the enchanting beauty, using tapestries.

What can you build yourself?

The material for making supports for clematis can be wood or metal. The thickness of the rods and wooden bars, to which the clematis leaf stalks cling, should not exceed 10-15 mm. Structures are built with a height of 1 to 5 meters or more.

Option # 1 - wooden trellis

For the manufacture of external frames of the structure with dimensions of 180x60 cm, you will need:

  • Four beams with a section of 50x40 mm and a length of 1.8 meters;
  • Four beams, section 100x40 mm, 0.6 meters long;
  • One plank with a section of 150x15 mm and a length of 0.6 meters.

To build an internal lattice, the dimensions of the cells of which are 25x15 cm, it is necessary to prepare:

  • Four slats with a section of 25x15 mm and a length of 1.8 meters;
  • Eight slats with a section of 25x15 mm and a length of 0.55 m.

Having prepared all the necessary elements for the trellis, we assemble the structure. To do this, we first make two external frames, the bars of which we connect to each other using a screwdriver and a drill. For the manufacture of the inner lathing, using a tape measure, we outline the dimensions of the cells and fasten the slats together with self-tapping screws.

The trellis for clematis is a structure consisting of two external frames, between which there is a wooden lattice

Install the grill between the two outer frames. To stiffen the structure on the upper side of the trellis, you can fix a horizontal strip connecting the outer frames and the crate

The tapestry is ready. It can be placed on the wall of a gazebo or at home, leaving a distance of 10 cm between the vertical surface and the structure. To extend the life of the wooden support, the surface of the trellis can be coated with paint or varnish.

You can learn more about how to build a gazebo with your own hands from the material: https://diz-cafe.com/postroiki/besedka-iz-polikarbonata-svoimi-rukami.html

Option # 2 - openwork arched structure

To make an elegant arch that will decorate the front area of ​​the site, you need to prepare:

  • Four pieces of pipe with a diameter of 30 mm with a wall thickness of 1.5 mm;
  • Metal rod with a section of 10x10 mm;
  • Concrete.

The dimensions of the future structure are determined based on where it will be located and what function it will perform. When planning to place an arch along the central path, which is 110 cm wide, it is necessary to build a structure 120 cm wide.The side walls of the arch can be made in the form of frames on legs, which can be filled with simple patterns of curls created from metal bars 6-8 mm thick.

Most often, arched vaults are given a semicircular shape, but the pointed, gable or ordinary flat version looks no less impressive.

Individual elements of the pattern can be easily made using cold forging or simply by winding a thin rod onto a pipe of a larger diameter.

If the flat vaults of the structure can be made independently, then it is better to bend the arched vaults on a rolling mill. The supporting pillars of the arch can simply be driven into the ground, deepening by 70-80 cm. If you want to create a more solid support for the flowers, it is advisable to additionally concrete the legs of the structure.

Having installed the walls of the arch, you can weld the vaults and connect them at several points with horizontal rods. Assembling a frame drawing is a fun creative process.

To simplify the process of creating a twisted pattern, it is advisable to first make full-size templates from soft aluminum wire, for clarity, which are fixed on the tensioned frame cords using clerical clips

First, we grab large elements, making smooth transitions from smaller arched parts. When the pattern is fully completed, we scald all the details on both sides, and then we process them against sagging.

The arch is assembled. It remains only to treat its surface with a rust converter, and then thoroughly wash, dry and paint in the desired color.

  • Print

Rate the article:

(11 votes, average: 3.8 out of 5)

Share with your friends!

Diy pergola photo for clematis

It is easy to turn ideas of support for clematis with your own hands from a dream into a reality, you just need to choose the right type of construction that suits the peculiarities of the variety of the weaving flower. The tapestries are installed from the material available. Edged wooden planks, fittings, mesh, rope, wire are in demand. Even an old dry tree in the garden or a bush can serve as a support.

What support to make for clematis

When looking for a photo and ready-made ideas for supports for clematis with your own hands, you need to have a clear idea of ​​what shape of the trellis is suitable for a certain variety, and what materials are needed for its manufacture. If you create a carpet composition from a flowering liana, it is optimal to let the plant drag along a grid or lattice structure that forms a plane. The varieties are selected those in which the inflorescences are located from root to top, and in the formed thickening they create the effect of a carpet. An excellent example is clematis "Jubilee 70" and "Space Melody".

To create a cascade, the variety "Biryuzinka" or "Alpinist" is well suited. Near the cylindrical supports, varieties are planted for which it is unusual to cling to shoots, for example, "White Dance" or "Alyonushka".

Important! The support will be covered with clematis only during the warm season. In winter, the frame is bare.

So that it does not spoil the appearance, the structure must initially be assembled with your own hands, neat and attractive.

Material for making supports for clematis

When creating beautiful supports for clematis, you should think about the convenience of weaving a flower by design. The idea for a trellis can be any mesh, stretched ropes, wire, lattice, self-assembled pyramid or other complex figure. In addition to the shape, the material for making the support affects the convenience of weaving.

Metal supports for clematis

A metal mesh or a do-it-yourself structure made of rods is considered the best option for the idea of ​​constructing a trellis. Firstly, the metal is durable, keeps its shape well. Secondly, it is easier for the plant to cling to thin rods. Clematis wraps around each element of the trellis so tightly that in the fall the gardener has to cut off each section with scissors.

Forged supports for clematis

Beautiful ideas for clematis supports can be realized using forged elements. The constructions are expensive. They will have to be bought, since it will not be possible to create a forged element with your own hands without a forge and experience. However, the support will become a real decoration of the yard even in winter, when it will stand naked without flowers.

Wooden planks

Wooden supports allow you to embody the most interesting ideas. Trellises, lattices on the walls look beautiful. The disadvantage of the material is a short service life. Under dense thickets of clematis, moisture often remains after dew, watering, rain. The wood rots every year, the structure loses its strength. The main disadvantage of the material is the impossibility of creating a structure from thin rods with your own hands. The support will turn out to be fragile. Wooden trellises are usually knocked off the plates. It is very difficult for shoots and leaves of clematis to catch on to a jumper with a thickness of more than 15 mm. Liana often has to be tied up with your own hands.

Mesh and flexible materials

The simplest support material is fishing line, cord, or wire. You can think of a lot of ideas for creating a trellis. Lines are laid along any path. You can even create an image of an animal or a geometric figure on the wall.

Flexible materials are convenient when creating openwork frames with your own hands. To implement such ideas, hardened elastic wire and thin reinforcement are used. Partially, sections of the frames can be tightened with a net of thread or fishing line, only in the fall they will have to be cut along with clematis. It is almost impossible to disentangle each vine shoot from small cells.

Support forms for clematis

You can find ready-made ideas for creating support shapes or come up with your own options. The second way is more profitable. The shape of the support is invented based on the features of the arrangement of the territory. If you just want to create something beautiful and simple on the site with your own hands, it is easier to use a ready-made idea.

Support for clematis in the form of a ball

A beautiful do-it-yourself stand for clematis can be made in the shape of a ball and installed on a flower bed. The structure is welded from curved rods. Legs in the form of pins are left below. They fix the ball to the ground.

Advice! You can easily assemble a ball with your own hands from three hoops. One of them should be larger in diameter and located between the two smaller rings.

The side elements of the ball, passing into the legs at the bottom, are bent out of an aluminum tube or a thin metal-plastic water pipe.

Arched structure

The arch looks beautiful from forged elements. Such a support can be placed above the passage in the fence dividing the site or at the entrance to the courtyard. The arch is installed in the middle of the site above the sidewalk path. The most common idea of ​​creating an arch is to arrange a resting place. The support is welded from metal tubes. The semicircle is bent out of the reinforcement. The arch is made wide with their own hands, so that a table and chairs can be installed under a canopy. The arched support is always high. It is better to plant clematis with small flowers near it. These varieties are usually tall.


A vertical or horizontal canopy braided with clematis is called a pergola. The support is a lattice, most often knocked down by hand from thin wooden planks. The pergola is often found on the gazebo. The support can consist of one or more frames with a grid. The pergola is attached to the wall of the building, installed with their own hands in the form of an independent structure on the site. The idea of ​​such a support can be the creation of a gazebo. The side spans between the pillars are sewn up with a pergola, forming walls, and a roof is placed on top.


Stable supports for clematis with their own hands in the form of a pyramid are called obelisks. The idea behind the creation is simple. Legs are placed from rods or wooden planks. From above, they converge to one point, forming a pyramid. The number of legs determines how many corners the obelisk will have. The racks are fastened together with crossbars. The obelisks are very stable. Supports are often placed in the middle of a flower garden or in the yard.


A trellis-shaped trellis is the simplest and most popular version of a do-it-yourself support. You can think of a lot of ideas. However, the basis of the lattice always remains a solid frame, inside which square or diamond-shaped cells are located. The size of the cells for convenient weaving of clematis is 50x50 mm. The lattice is often attached to the wall. You can install the support with your own hands as an independent structure, but only with a limitation in height and width. A braided lattice with clematis creates a large windage and can collapse in strong winds.


A beautiful support for clematis trellis is a trellis in the form of a lattice, only a structure of three or more sections is made. The most common option is a 3-section product. First, 3 rectangular frames are assembled. On the central support, the cells from the slats are stuffed in the shape of a rhombus. The side grilles are made with the correct squares. The frames are interconnected into one wall. A semicircle is installed above the central lattice, inside which the strips are attached, forming the rays of the rising sun.

The trellis requires reliable fastening with your own hands in the ground, but it is better to fix the upper part with guy wires to the building because of the large windage. The support patterns are not necessarily cells. You can come up with your own ideas.

How to make a support for clematis with your own hands

Each of the best supports for clematis found in the picture can always be created with your own hands from the available material. It takes a tool and a little effort.

Do-it-yourself trellis for clematis

The idea of ​​creating trellises most often involves fixing the support to the wall of the building. Uneven old facades and destroyed cladding are hidden under the clematis. Due to the reliability of fastening to the wall, the height of the trellis can reach more than 3 m and rise to the very roof.

It is better to assemble wall trellises with your own hands from wooden planks with a cross section of 4x1 cm.The frame is knocked down from thicker blanks. When sheathing the frame with planks, the size of the cells is observed. The minimum value is 5x5 cm, the maximum is 20x20 cm.

A traditional trellis in the form of a rectangular lattice is not as beautiful as a multi-tiered structure. To create it, 8 vertical slats of different lengths are attached to 6 horizontal elements, forming the planes of the tiers. In the future, the frames are sewn up with planks, creating cells.

Do-it-yourself arch for clematis from fittings

When creating an arch for clematis with your own hands, it is convenient to use the reinforcement because of its elasticity. During bending, the rod forms a perfectly regular semicircle, which will only have to be fixed to the uprights. The metal structure is connected by welding. First, racks made of a metal pipe are dug into the ground or concreted. Arcs are bent from the reinforcement, forming an arched vault. The ends of the rods are slightly led inside the racks from the pipe, welded by welding. Do-it-yourself cells are also made from reinforcement. The rods are welded to all elements of the frame, thereby increasing the strength of the arched support. The finished metal structure is painted to protect it from corrosion.

Support for clematis with your own hands from the grid

Flexible material allows you to embody many ideas when creating supports. When a mesh netting is available, this is a ready-made version of a trellis for tying clematis. If a fence is made of a mesh, then a living flowering hedge is arranged with lianas planted next to it. The support can be installed with your own hands in the middle of the yard. The mesh is enclosed inside a metal frame welded from a corner. The legs of the support are concreted in the ground.

It is a good idea to create a cylindrical support from the road mesh. The structure can be used to decorate a post or a dry tree trunk that has not been cut down. A ring is curved around the road mesh object. The edges are tied with wire. Pins are welded from below to fix the support in the ground. Clematis are planted outside or inside the cylinder.

Forsythia mock-orange bushes as supports for clematis

Shrubs that have faded in early spring will serve as a ready support for clematis. Forsythia, spiraea or mock-orange are best suited. You can let the liana trail along the lilac. Clematis is planted near the bush on the shady side. The growing lashes are tied to the lower branches, and then they themselves weave to the very top. Blooming clematis forms a beautiful head on the bush.

Advice! Any dry tree in the garden, and even a green spruce, can serve as a support for clematis.

Do-it-yourself pergola for clematis

The idea of ​​creating a pergola is often understood as the construction of a gazebo, sheathed with a lattice of wooden planks. The walls are braided with clematis of fast-growing varieties. The frame of the gazebo is assembled with your own hands from a bar. The racks are connected to each other by crossbars, which form a frame for pergolas. The roof can also be made openwork from slats and braided with clematis, but it will leak when it rains. More often the gazebo is covered with light roofing material. The growing clematis will gradually spread from the pergola to the roof and completely braid it.

How to tie flowers to a support correctly

If the support has not yet been erected on the site, then they begin to install it with their own hands before planting clematis. When the planted vine starts up the first shoots, the horizontal lower element of the trellis is immediately wrapped around them. The growing stems are gradually guided along the vertical slats, helping to catch on to the higher horizontal bridges.

If clematis is not able to firmly fix itself to the support, the stems are constantly tied with fishing line as they grow. It is undesirable to use wide ropes made of fabric, as they spoil the appearance. Stems along the trellis are evenly fanned out, do not allow them to intertwine.


Ideas for support for clematis with their own hands are laid out by many flower growers on thematic forums. If you succeed in creating an unusual design, it is worth sharing it with other people. Let the beauty of curly flowers bring joy to someone else.

Supports for clematis do it yourself

Clematis are beautiful climbing plants that need strong support. Of course, it can also be purchased in the store, but sometimes, with a little imagination, the support can be quickly built from improvised means.

  • Support from willow twigs
  • You will need: - high poles, you can use willow twigs or just cut branches (4 pieces) - a rope or twine - an ax.

First of all, sharpen the tops of the branches so that they can be stuck into the ground without any problems. Then draw a square of the required size on the ground and hammer in the poles in its corners. Next, you need to braid them using young willow twigs.

But there is no need to do it very tightly. It is enough to form several squares located every 20 centimeters high.

Be sure to secure them with twine, so that later, under the weight of the plant, they do not slide out.

Another option is a wicker support made of twigs. The materials are the same. But now the tops of the rods must be pulled tightly. In this case, you will get a structure that resembles the base of a yurt or a plague.

Further inside, you need to lay rings formed from willow or vine branches, or reproduce the option proposed in the photo, similar to a tower or a power transmission tower.

Then additionally secure all the jumpers-sticks with twine or rope.

  1. Support from a chain-link mesh
  2. A great option for a homemade support.
  3. You will need: - mesh netting (coarse-mesh) - wooden post (2 pcs)

Dig in the pillars where you plan on landscaping. And then just attach the mesh fabric between them. Both hooks and sturdy wire can be used here.

  • It is best to choose a galvanized or plasticized chain-link.
  • Alternatively, you can simply lean the dense mesh-netting against the wall and run the plant along it.
  • Using the wall at home

In this case, everything is quite simple. You will need: - nails or screws - strong twine or rope.

Sometimes designs may not be required at all. Just hammer nails into the top of the wall. Tie the clematis neatly with twine, and fasten its upper end to the nail. The plant, as it grows, will twine around the rope, climbing up along it.

Support-cylinder made of mesh

It can be used to mask, for example, porch pillars or a dry tree. Clematis, sitting on such a support, looks very impressive.

To make a cylinder, you will need: - PVC coated mesh or a regular chain-link - two reinforcing rods - strong wire.

The mesh must be twisted in the form of a cylinder and secured with a wire. On both sides of the structure, it is necessary to weld or properly attach the reinforcement, leaving about 50 centimeters protruding over the edge. You will later dig them into the ground, ensuring the stability of the cylinder. If you used a non-galvanized mesh, then it must be painted.

  1. Round support
  2. Prepare: - a high stick or a pole - a strong twine or rope - something round like a hoop (for example, a wheel from an old bicycle without a center piece).

Drive a stake near the plant. Then put the wheel on it, so that the clematis cuttings planted in the fall are inside the structure. Now fix it in the ground, you can just use wire pins and tie long pieces of twine to it. In turn, secure the ends of the rope at the top of the stick.

Wall trellis

This is the most common homemade clematis support. It is only important to remember that the slats should be taken not very thick and wide. Otherwise, the plant will not be able to stay on it.

Such trellises can be in the form of a lattice. Or they can simply radiate from the plant, which are also fixed either on the fence, or on the wall of the house, or on a free-standing pillar.

Pea garter

Gardeners have been tying legumes for a long time... After all, it is very problematic to harvest on the lashes creeping along the ground. And half of the pods, especially in the rainy season, will simply rot. Plus, due to insufficient illumination, the peas lose their taste and sweetness, since they are not able to accumulate useful substances in sufficient quantities.

On an inclined trellis, pods hanging vertically will be more visible

Too complex structures for peas do not need to be built. Any materials at hand will do, including branches of thick trees. They are sharpened at one end, driven into the ground and tied together with wire.

We will not describe detailed step-by-step instructions for making trellis for peas. In the photo below, you can choose a suitable type of trellis for legumes.

Making a trellis for climbing plants

How to make a trellis with your own hands? Original ideas and drawings (110+ Photos & Videos) + Reviews

Feedback from our readers is very important for us. Leave your rating in the comments with the reasoning for your choice. Your opinion will be useful to other users.

Watch the video: Aprajita Creeper Beautiful Trellis under